The Problem
Common problem with this module :
-Takes several attempts before car will start
-Steering lock fault code
-Clicking noise when key inserted
-No ignition car will not start
-Vehicle immobilized
If there is an issue with any of the lock module components (actuator motor, sensing micro switches, relay) or the integrated Immobilizer system Microprocessor/PCB, the module will not provide power to Terminal 15 (ignition on). End result, no ignition and no engine start.
If you already managed to reset this error by EOBD diagnostics the problem will most likely happen again unless you change the parts supplied in this KIT.
DIY Job.
Anyone with basic knowledge and tools can desolder old and solder new parts. Just be patient and tidy.
The Solution
We are selling STEERING COLUMN LOCK ACTUATOR REPAIR KIT FOR VW Passat B6 & CC
You will get OEM replacement parts.
All the components are original of the same manufacturer used to the first assembly by VW.
Repair Kit for module 3C0905864
Fits vehicles below
VW Passat B6 2006-2015
VW Passat CC 2009-2017
KIT includes
2 x Relay
2 x Switch (one with metal plate)
If the module if from your car then NO ADAPTATION is required. Just put it back in when you change the parts.
*This kit will not solve the problem if the motor itself is damaged. You can check the motor easily with 12VDC supply. It happens rarely but it’s better to check
Expedited shipping, tracking number included.
Have a nice day :)